Detectors & Devices

Conventional Optical Smoke Detector - C-9102
Aesthetically pleasing low profile design
Twin LED for 360° Vision
Removable Optical Chamber Foe Easy Cleaning and maintenance
More..

Conventional Optical Smoke Detector - C-9103
Fixed Temperature and Rate of rise Heat Detection
Aesthetically pleasing low profile design
Twin LED for 360° Vision
More..

Conventional Ultraviolet Flame Detector - C-9104
Sensitive Ultraviolet Sensor that detects the UV rays Produced by a flame
Aesthetically pleasing low profile design
Dust / Corrosion / Humidity Resistant
More..

4-Wire Conventional Smoke Detector - R-6601
12 Vdc power conventional detector
Built-in N/O contact
Sensing chamber for exceptional dust proof ability
Single LED
More..

Intelligent Reflective Beam Detector - C-9105 (Fire Alarm System)
Range 8-100 Meters,
2 selectable levels of sensitivity adjustment.
Ideal for Atriums, Warehouses, Shopping Centers, Airport Terminals etc.
More..

GST Duct Probe - DP-9100 (Fire Alarm System)
Duct probe housing for detection of smoke by sampling moving air inside the duct.
Easy maintenance as detector is mounted externally to the duct.
Pre-wired detector base
More..

Conventional Combustible Gas Detector - C-9602L
Available for LPG, Natural Gas & Coal Gas (Specify at time of order)
Built – In Relay contacts for control of Gas Valves / Extract etc.
Built – In Sounder with 2 stage alarm
More..

Conventional Combustible Gas Detector - C-9602LW
Available for LPG, Natural Gas & Coal Gas (Specify at time of order)
Built – In Relay contacts for control of Gas Valves / Extract etc.
Built – In Sounder with 2 stage alarm
More..

Remote Indicator - C-9314 P (Fire Alarm System)
Remote indicator for direct connection to detector remote indicator terminals
Compatible with:
Addressable: I-9102R Optical Detector and I-9103R Dual Heat Detector.
Conventional: C-9102R Optical Detector and C-9103R Heat Detector.
More..

Conventional Manual Call Point - C-9201
Manual Call Point (MCP) with Re – Settable (Non Breaking) Glass
Additional volt free contacts for local interfacing (i.e. PTZ camera preset)
Two parts plug-in construction with base mounted termination allows for easy installation and connection.
More..

Conventional Manual Call Point - C-9202
Compatible with latest EN standards.
Non-breaking re-settable glass (via special key).
Two parts plug-in construction with base mounted termination allows easy installation and connection.
More..

Weather Proof Box - C-92WPB (Fire Alarm System)
IP 65 protective enclousure for manual call points
More..

Power Remote Indicator - C-9314 (Fire Alarm System)
Conventional Alarm Indicator with local sounder
Connects to 12 or 24VDC supply.
Dimension: 120  mm × 80 mm × 49 mm
More..

Conventional Sounder Beacon - C-9401
Conventional combined flashing high intensity LED beacon and sounder
Two part plug-in construction with base mounted termination allowing easy installation and connection
Operating voltage: Loop 24V Polarized
More..

Conventional Sounder Base - C-9402
Conventional Base Mounted Sounder
Can be used as a common base of detector or stand alone with a cover.
Compatible sound with I-9403 / C-9403 Sounder Flasher and I-9404 / C-9404 Sounder.
More..

Conventional Sounder And Strobe - C-9403
Two parts construction with base mounted termination allows easy installation
Strobe provided by high intensity LED cluster
Operating Voltage: Loop 24V, Polarized
More..

Conventional Sounder - C-9404
Identical in appearance and features to the i-9403 but without the strobe element
Operating voltage: loop 24 V , Polarized
Sounder output: 94dB @ 1 meter
More..

Strobe With Siren - AO-FS01
Electronic Bell + Bright LED Strobe small type
Electronic fire sirens are intended for fire alarm
Ploycarbonate / ABS housing
Voltage : 24DC (50 mA)
Sounder Output : 100db +/- 5db
Strobe : 8,000 mcd, six super bright LED's
Designed to deliver maximum loud and clear fire siren sound
Operating current at 24VDC, 50mA (with strobe)

Strobe With Siren - AO-FS02
For fire alarm applications only
Polycarbonate / ABS housing
Designed to deliver maximum loud and clear fire siren sound
Voltage : 24VDC
Current : 100 mA
Sounder Output : 112db/30cm
Tmperature : 100 to 500

Strobe With Siren - AO-FS03
For fire alarm applications only
Polycarbonate / ABS housing
Designed to deliver maximum loud and clear fire siren sound
Voltage: 15-30V DC
Current: 100mA
Sounder Output : 120db/30cm
24 VDC operated Panel.
Temperature: -10 to 50

RESETTABLE MANUAL CALL POINT - AO-RS01
Resettable manual call point
Suitable for NO or NC fire or access systems
With high impact strength, high resistance to heat
Current Ratings : 30V DC 2A Maximum
Operating temperature : -30? to 70?
Alarm Impedance : 280? , 470 ?
All metal is of brass and phosphor bronze ensuring life long resistance against corrosion
The casing moulded from engineered plastic

BREAK GLASS MANUAL CALL POINT - AO-BG01
Suitable for NO or NC fire or access systems
The casing is moulded from engineered plastic
With high impact strength, high resistance to heat
All metal is of brass and phosphor bronze ensuring life long resistance against corrosion
Current Ratings : 12/24V DC 10A, 48V DC 3A, 250V AC 10A
Size : 88mm X 88mm X 55mm
Net weight : 160gms

Stand Alone Smoke Detector - S-9102
Self contain Optical Smoke detector and alarm sounder
With test and reset button
9v operated
Low battery indication
More..

Conventional Fire Telephone Panel - FT8W
8 Zone addressable fire telephone center.
2-way voice communication
Networkable up to 8 Fire Telephone panels
Call divert to the main panel
More..

Conventional Fire Telephone Panel - FT24WN
24 Zone conventional fire telephone center.
2-way voice communication
Operator can select single or group call
Operator can ring outstations and fixed handsets
More..

FIRE TELEPHONE JACK - P-9911(J)
Easy to insert mobile handset
Wall mounted.
Easy installation and connection.
More..

FIRE TELEPHONE JACK - P-9911(M)
Easy to insert mobile handset
Compatible with GST Fire Telephone Jack
More..

SPEAKER FIRE TELEPHONE OUTSTATION - P-9911(S)
Hands-free extension of fire telephone.
Compatible with all GST conventional fire telephone handset in same zone

FIXED FIRE TELEPHONE HANDSET - P-9911(F)
Fixed extension of fire telephone System
Box for total protection.
Wall Mounted and easy installation
More..

Deep Base - C-94DB
Optional Deep Base For Sounder And Strobe (I-9403 / I-9404)
More..

Standard Detector Base - DZ-03
Fixing & Terminating of Conventional Detectors with directional gaps.
Compatible with GST conventional detectors using 4K7 Ohm resistor end of line.(EOL)
Common base for GST C-9101/2/3/4
More..

Diode Conventional Base - DZ-03D
Diode base version for conventional detectors utilizing the Active End Of Line(AEOL) (P-9907)
Common base for C-9101/2/3/4
More..

Active End Of Line - P-9907
Active End Of Line For Conventional Fire Detection Zones
It Can be used as Conventional Detector Base or Work independent with a cover
Provide detector removal indication while still enabling alarms 360° down stream of the missing device to be detected
More..

Protective Flip Cover - C-92FC
Protects call point from accidental operation, suitable for C-9202 Manual Call Point
More..